Usb Device - Sony STR-DN1030 Operating Instructions Manual

Hi-fi receivers: multi channel av receiver
Hide thumbs Also See for STR-DN1030:
Table of Contents

Advertisement

iPod/iPhone
The sound is distorted.
• Press MASTER VOL – or
remote control repeatedly.
• Set the "EQ" setting of the iPod/iPhone to
"Off" or "Flat".
There is no sound from the iPod/
iPhone.
• Disconnect the iPod/iPhone and connect
the iPod/iPhone again.
The iPod/iPhone cannot be charged.
• Check that the receiver is turned on.
• Make sure the iPod/iPhone is connected
firmly.
The iPod/iPhone cannot be operated.
• Check that you have removed the protect
case of the iPod/iPhone.
• Depending on the contents of the iPod/
iPhone, it may take time to start playback.
• Disconnect the iPod/iPhone and connect
the iPod/iPhone again.
• You are using an unsupported iPod/
iPhone. See "Compatible iPod/iPhone
models" (page 52) for the supported
device types.
The ring volume of the iPhone does not
change.
• Adjust the ring volume using the controls
on the iPhone.

USB device

Are you using a supported USB
device?
2
– on the
There is noise, skipping, or distorted
sound.
The USB device is not recognized.
Playback does not start.
The USB device cannot be connected
into the
• If you connect an unsupported USB
device, the following problems may occur.
See "Compatible USB devices" (page 55)
for the supported device types.
– The USB device is not recognized.
– File or folder names are not displayed
on this receiver.
– Playback is not possible.
– The sound skips.
– There is noise.
– A distorted sound is output.
• Turn off the receiver and reconnect the
USB device, then turn on the receiver.
• The music data itself contains noise, or the
sound is distorted.
• Turn off the receiver, then disconnect the
USB device. Turn on the receiver again
and reconnect the USB device.
• Connect the supported USB device
(page 55).
• The USB device does not work properly.
Refer to the USB device operating
instructions on how to deal with this
problem.
• Turn off the receiver and reconnect the
USB device, then turn on the receiver.
• Connect the supported USB device
(page 55).
• Press N to start playback.
(USB) port.
• The USB device is being connected upside
down. Connect the USB device in the
correct orientation.
continued
US
119

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents