Woodpeckers ULTRA-SHEAR-3-FLUTE-1-INCH-SPOILBOARD-ROUTER-BITS-GROUP Manual

LTRA-SHEAR
y Woodpeckers
" DIA. 3-FLUTE
CARBIDE INSERT
SPOILBOARD BITS
Recommended Maximum
Speed: 30,000rpm
When fresh cutting edges are needed, loosen
Torx screw with supplied Torx wrench.
Rotate the blades to a sharp edge.
Then press the blade against the seat with
the edge of the blade in the
groove and re-tighten.
Countersunk Square Carbide Insert
.40" Square 3-Pack 20 33IX3
Available at Woodpeck.com
If you think you ' re missing anything, email us at mailroom@woodpeck.com .
You can also call us at 800-752-0725 from 9:00 a.m. to 4:00 p.m. EST Monday - Friday.