Table of Contents
Advertisement
Time-setting options
en
Example in the picture: Top/bottom heating at 180 °C.
Use the rotary selector to change the type of
1.
heating.
Touch the default temperature.
2.
Use the rotary selector to change the temperature.
3.
Press the Start/Stop button to start.
4.
The set type of heating and the temperature are shown
on the display.
Rapid heat up
You can use the
button to heat up the cooking
c
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
4D hot air
:
Top/bottom heating
%
Intensive heat
&
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
Applying settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heating function cannot be started.
14
Set the type of heating and temperature.
1.
Press the
button.
c
2.
The
c
symbol appears on the left next to the
temperature. The temperature indicator starts to fill in.
When rapid heating is complete, an audible signal
sounds. The
symbol goes out. Place your dish in
c
the cooking compartment.
Notes
If a cooking time has been set, this runs
■
independently of rapid heating and counts down
immediately when the operation is started.
You can use the
button to check the current
l
■
cooking compartment temperature during rapid
heating.
Cancelling
Press the
button. The
c
the display.
OTime-setting options
Y our appliance has different time-setting options.
T i m e - s e t t i n g o p t i o n s
Time-setting option
Use
Timer
The timer functions like an egg timer. An
Q
audible signal sounds once the set time
has elapsed.
Cooking time
A signal sounds once a set cooking time
+
has elapsed. The appliance switches off
automatically.
End time
Set a cooking time and an end time. The
*
appliance switches off automatically so
that the operation ends at the desired
time.
Notes
A cooking time of up to one hour can be set exactly
■
to the minute.
A cooking time over one hour can be set in five-
minute increments.
Depending on which direction you turn the rotary
■
selector, the cooking time starts at a default value:
Anti-clockwise, 10 minutes,
Clockwise, 30 minutes.
After a time-setting option has elapsed, a signal
■
sounds and "Finished" appears in the status bar.
Using the
button, you can request information
l
■
during the operation, which then appears briefly in
the display.
symbol disappears from
c
Advertisement
Table of Contents
