Linking Two Speakers - ION TAILGATER TOUGH Manual

Linking Two Speakers

If you would like to play music from a Bluetooth device, you can first "link" two Tailgater®
Tough speakers together in order to listen to your music in stereo. One Tailgater® Tough will
serve as the left speaker and the other will serve as the right speaker.
1 - SPEAKER 1 - DOUBLE PRESS
To link two Tailgater® Tough speakers together:
Note: When you begin the Stereo-Link® process, any connected Bluetooth devices will be
automatically disconnected. You can also disconnect your device prior to beginning by
double-pressing the Bluetooth button.
1. Double press the Bluetooth button on each speaker to enter Stereo-Link® mode. Once
linked, the primary (left) speaker will enter Bluetooth pairing mode.
Note: The linking process can take up to 30 seconds to complete. The closer the two
speakers are to each other, the quicker the link is established.
2. Navigate to your Bluetooth device's setup screen, find TAILGATER TOUGH, and connect.
The Bluetooth icon on the primary speaker will flash to indicate it is searching for a
Bluetooth device to pair with.
When the connection is successful, you will hear "Bluetooth Connected" from the primary
speaker (if voice prompts are enabled). When audio playback begins, you should hear it
through both speakers. The primary speaker will play the left channel while the secondary
speaker plays the right channel. Playback controls are active on both speakers.
To disconnect two speakers or cancel linking between the two, double press the Bluetooth
button on either speaker.
Note: Pressing and holding the Power button on the primary speaker while in Stereo-Link®
mode will power o all connected speakers. Tailgater® Tough speakers powered o in Stereo-
Link® mode will automatically enter Stereo-Link® mode the next time they are powered on and
begin searching for secondary speakers to connect to.
ION Audio Tailgater Tough User Guide
®
2 - SPEAKER 2 - DOUBLE PRESS
TAILGATER™ TOUGH
3
11