ION Tailgater Flash Quick Start Manual

ION Tailgater Flash Quick Start Manual

Advertisement

®
Tailgater
Flash
Quickstart Guide
Appendix

Advertisement

Table of Contents
loading

Summary of Contents for ION Tailgater Flash

  • Page 1 ® ™ Tailgater Flash Quickstart Guide Appendix...
  • Page 3: Box Contents

    5. Ensure the Master Volume on Tailgater Flash is at zero. 6. Connect your devices. 7. Raise the volume to a comfortable level. 8. Return the Master Volume to zero when you are finished using Tailgater Flash. Box Contents Tailgater Flash Microphone with mic cable 3.5mm (1/8”) to 3.5mm (1/8”) cable...
  • Page 4: Safety Instructions

    Safety Instructions • Keep a minimum of 5 cm of distance around the product for sufficient ventilation. The ventilation should not be impeded by covering them with items such as newspaper, tablecloths, curtains, etc. • Attention should be drawn to the environmental aspects of battery disposal. •...
  • Page 5: Top Panel

    Lightning Bolt Icon: The lightning bolt icon will illuminate when the IEC power cable is connected to wall power. Decimal Icon: The decimal icon will be lit when Tailgater Flash is powered on. The decimal icon will not be lit when Tailgater Flash is powered off.
  • Page 6: Rear Panel

    If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. This will allow you to play the music louder before clipping (distortion) occurs. You can also control EQ using the free ION Block Rocker app for iOS and Android.
  • Page 7: Technical Specifications

    ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license.
  • Page 8 ionaudio.com Manual Version 1.1...

Table of Contents