Linking Two Speakers - ION AQUABOOM X User Manual

Linking Two Speakers

1 - SPEAKER 1 - PRESS 2x
If you would like to play music from a Bluetooth device, you can first "link" two Aquaboom™
X speakers together in order to listen to your music in stereo. One Aquaboom™ X will serve as
the left speaker and the other will serve as the right speaker.
To link two Aquaboom™ X speakers together:
Note: When you begin the Stereo-Link™ process, any connected Bluetooth devices will be
automatically disconnected. You can also disconnect your device prior to beginning by
pressing the Bluetooth button.
1. Double press the Bluetooth button on the first speaker. This first unit pressed will be the
primary speaker (Left channel).
2. Next, double press the Bluetooth button on the second speaker. This will be the secondary
speaker (Right channel).
Note: The linking process can take up to 30 seconds to complete. Speakers should be within
75' (22.9 m) of each other to properly link. The closer the two speakers are, the quicker the
link is established.
3. Once the speakers are linked, the primary speaker (left) will enter Bluetooth pairing mode
(Bluetooth button flashing blue). Navigate to your device's Bluetooth settings screen, find
AQUABOOM X, and connect. When the connection is successful, the Bluetooth button will
be lit solid blue. When audio playback begins, you should hear it through both speakers.
The primary speaker will play the left channel while the secondary speaker plays the right
channel. Playback controls are active on both speakers.
To disconnect two speakers or cancel linking between the two, double press the Bluetooth
button on one Aquaboom™ X.
Note: Press and hold the Power button on one speaker while in Stereo-Link™ mode to power
o the connected speakers. Aquaboom™ X speakers powered o
automatically enter Stereo-Link™ mode the next time they are powered on and begin
searching for secondary speakers to connect to.
ION Audio Aquaboom™ X User Guide
2 - SPEAKER 2 - PRESS 2x
AQUABOOM X
3
in Stereo-Link™ mode will
10