Setup; Charging And Battery Information - ION TAILGATER TOUGH Manual

SETUP

Charging and Battery Information

For the quickest charging time, power o
USB-C® cable to connect the USB-C® charging port on the rear panel of the speaker to a USB
power adapter (DC 5V 2A, not included) connected to a power outlet, or your computer
(powered on). A full charge can take up to 5 hours, depending on the specifications of your
5V, 2A adapter.
The battery charging LEDs will fill to display the battery life percentage:
When fully charged (>95%), all 5 LEDs will be lit.
•
When the battery level falls below 95%, the rightmost LED will turn o .
•
When the battery level falls below 60%, the two rightmost LEDs will turn o .
•
• When the battery level falls below 40%, the three rightmost LEDs will turn o .
When the battery level falls below 20%, only the leftmost LED is on (4 o ).
•
If no audio is played through the Tailgater® Tough speaker for 15 minutes, the unit will enter a
standby mode to conserve battery life. This may mean the Bluetooth signal is paused, no audio
is coming through a device connected to the aux port, or the volume is set to 0. To wake the
unit, simply resume audio signal or press any button.
When the Tailgater® Tough speaker is connected to a Bluetooth audio output device and no
audio is playing from any source, the speaker will automatically power o
have passed.
ION Audio Tailgater Tough User Guide
®
Tailgater® Tough and use the included USB-A to
after 60 minutes
5