Stereo-Link Tm : Linking Two Speakers - ION Party Splash User Manual

Stereo-Link TM : Linking Two Speakers
Note: In order to use Stereo-Link
another Party Splash™ is connected to a Bluetooth device, disconnect by pressing and holding
the Bluetooth button.
1 - PRESS & HOLD
(speakers 1 & 2)
To link two speakers together:
1. Press and hold the Power buttons on both Party Splash™ speakers.
2. Double-press the Bluetooth button on one speaker. Repeat this for the second speaker.
The speakers will search for each other to link as the blue LEDs next to the Bluetooth
buttons begin to blink fast.
Note: It may take up to 1 minute to make the connection.
3. When the two speakers are "linked," one speaker's blue LED will be lit solid, while the other
speaker's blue LED will blink slowly to indicate it's ready to pair the stereo-linked speakers
to your Bluetooth device.
4. Navigate to your Bluetooth device's setup screen, find PARTY SPLASH, and connect.
To disconnect, double press the Bluetooth button on one of the two speakers.
Note: If a speaker is in Stereo-Link
mode the next time you power it on (they will automatically link when you power them on as
long as they are in close range of each other and powered on within 15 seconds of each other).
ION Audio Party Splash™ User Guide
TM mode, you cannot have a Bluetooth device connected. If
2 - PRESS x2 3 - READY TO PAIR
(speakers 1 & 2)
TM mode when you power it o , it will be in Stereo-Link
(speaker 1)
PARTY SPLASH TM
4
TM
12