Pairing A Bluetooth® Device - ION TAILGATER TOUGH Manual

Pairing a Bluetooth® Device
1 - PRESS AND HOLD FOR 2 SECONDS
1. Turn on your Bluetooth device.
2. Power on Tailgater® Tough by holding down the Power button for 2 seconds. When the unit
is first turned on, it will automatically enter Bluetooth pairing mode. If necessary, press the
Source button to select Bluetooth mode.
3. Navigate to your device's Bluetooth setup screen, find TAILGATER TOUGH, and connect.
The Bluetooth icon will appear in the display, and if voice prompts are enabled, you will
hear "Bluetooth Connected".
Note: If your Bluetooth device prompts for a pairing code, enter "0000".
To disconnect a paired device, do any of the following:
• Turn o Bluetooth from your device's Bluetooth settings. The speaker will enter
Bluetooth pairing mode to make it available for another device.
• Double-press the Bluetooth button to disconnect and re-enter pairing mode.
• Briefly press the Bluetooth button to disconnect and enter Aux mode.
Once you have disconnected, you will hear "Bluetooth Disconnected" if voice prompts are
enabled.
Tip: Double press the Power button to turn voice prompts on or o .
ION Audio Tailgater Tough User Guide
®
TAILGATER™ TOUGH
2
10