Linking Two Speakers - ION TOTAL PA ULTIMATE User Manual

Linking Two Speakers

1 - PRESS AND HOLD
Linking Two Speakers (Stereo-Link™)
1. Power on both Total PA™ Ultimate speakers by flipping their on/o
they are in Bluetooth pairing mode and not connected to a device.
2. Press and hold the Stereo-Link™ / Repeat button on one speaker (the primary speaker
which will control both) and then the Stereo-Link™ / Repeat button on the secondary
speaker to enter Stereo-Link™ mode. Once a link has been established, the word LINK will
appear on both speaker displays.
3. Connect to the primary speaker via Bluetooth.
To disconnect, double press the Stereo-Link™ / Repeat button.
Note: The speakers should be within 85' (29.5 m) of each other to properly link.
Note: Total PA™ Ultimate is not compatible with previous ION PA models. To link to a previous
model, you will need to use an XLR cable (not included). Connect the XLR cable to the MIX
Out XLR port on the Total PA™ Ultimate to the XLR In port on the previous model.
ION Audio Total PA™ Ultimate User Guide
(Speaker 1)
2 - PRESS AND HOLD
(Speaker 2)
switches. Make sure
12