Functions
Open
Reset input
Short-
circuit
ON
Sensor detection
output
OFF
ON
Control output 1 / 2
(OSSD 1 / 2)
OFF
3-2-2 Auto reset
When the detecting output of sensor is ON (without liquid leak), control outputs 1 / 2 (OSSD 1 / 2)
can be automatically ON.
To monitor an external device, a back check circuit (KA, KB) should be prepared between X1
and X3. If a back check circuit (KA, KB) is not required, the circuit between X1 and X3 should
be shorted.
put (white) of safety leak sensor is broken.
When this device is operated in auto reset, auto recovery of the system after
(From EN 60204-1)
ON
Sensor detection
output
OFF
30ms or more
ON
Control output 1 / 2
(OSSD 1 / 2)
OFF
22
30ms or more
20ms or less
X1
X1
20ms or less
100ms or less
100ms or less
KA
KB
MJE-SQ4C11 No. 0095-80V
X2
X2
-