Operation; Maintenance - Makita MP100D Instruction Manual

Lamp Main power switch
CAUTION:
pressing the main power switch, the lamp goes out.
NOTICE:
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
it may lower the illumination.
Hose holder

OPERATION

Unfold the air chuck clamp.
chuck clamp
Turn on the tool.
checking the status of the tire.
NOTICE:
Unfold the air chuck clamp.
Presta valve adapter
Hose
Valve stem
Valve stem
Turn on the tool, and then set the pressure value
appropriate for the tire using the pressure gauge.
Loosen the locking nut on the valve stem.
Locking nut
Unfold the air chuck clamp.
and then attach the air chuck to the Presta valve adapter.
Presta valve adapter
chuck clamp
Turn on the tool, and then set the pressure value
appropriate for the tire using the pressure gauge.
Remove the air chuck and Presta valve adapter,
and then tighten the locking nut.
Unfold the air chuck clamp.
needle
the hole on the item.
Turn on the tool, and then set the appropriate
pressure value using the pressure gauge.
NOTICE:

MAINTENANCE

CAUTION:
NOTICE:
Centers, always using Makita replacement parts.
9 ENGLISH
Valve stem
Tapered adapter
-
-
-