Functional Description - Makita MP100D Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
CAUTION:
CAUTION:
Red indicator
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
CAUTION:
you or someone around you.
CAUTION:
If the cartridge does not slide in easily, it is
Only for battery cartridges with the indicator
Indicator lamps
light up for a few seconds.
NOTE: Depending on the conditions of use and the
from the actual capacity.
-
Button Battery cartridge
If not,
-
The tool will automatically stop during operation if the
The tool is operated in a manner that causes it to draw
the tool on to restart.
on again.
will not operate. If you turn the tool on, the motor runs
WARNING:
CAUTION:
Main power switch
To turn on the tool, press the main power switch. To turn
NOTE:
To avoid unintentional start up, the main power switch
will automatically shut down when the switch trigger
is not pulled for a certain period after the main power
switch is turned on.
WARNING:
Switch trigger
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
gauge when you turn on the tool. If nothing is connected
to the tool, the pressure gauge displays "0".
You can set the air pressure on the pressure gauge. To
8 ENGLISH
Otherwise, pulling the switch
-