European Community Declaration Of Conformity - Kemper Filter-Cell XL Manual

13. European Community Declaration of Conformity

According to the European community machine standard 2006/42/EC
Manufacturer:
Mr. Manfred Könnig is authorized to compile the technical documentation.
We hereby declare that the following machine with all relevant provisions of the EC Machinery Directive 2006/42/EC
in accordance.
Part No.
Description:
The machine is also in accordance with all relevant provisions of the following EC-guidelines:
2006/42/EC
2004/108/EC
2006/95/EC
The following harmonized standards (or parts of these standards) were used:
EN ISO 12100 part 1+2, EN 294,
EN 349, EN 418, EN 983
EN 1050
EN 60204 -1
EMVG
EN 610000-6 part 3
EN 610000-6 part 2
The following technical specifications (or parts of these standards) were used:
VDE 0100
VDE 0113
UVV BGV A1
BGR 500 2.26
DIN 45635
The Annex VIII of Directive 2006/42/EC has been observed. Compliance with the requirements of Low Voltage Directive
has been ensured in accordance with Annex I, point 1.5.1 of Directive 2006/42/EC.
Additional information
This explanation loses its validity, if the machine is not used in proper use and if a change not co-ordinated with the
manufacturer in written form is made.
Vreden, 01.12.2009
KEMPER GmbH
Dipl.-Ing.M. Könning
(Chief Technical Engineer)
KEMPER GmbH
Von-Siemens-Str. 20
D-48691 Vreden
60 200
KEMPER Filter-Cell XL
Machine safety guideline
Electromagnetic compatibility
Low-voltage - guideline
Security of machines
Security of machines - guiding principles for risk evaluation
Electrical equipment of machines
Law referring to the electromagnetic compatibility of machines
Specialized basic standard noise immunity
Specialized basic standard noise emissions
Construction of low-voltage plants
Electrical equipment of machines - complies to EN 60204-1
Regulations for the prevention of accidents: Principles of prevention
Weld, cuts and related procedures
Noise levels at machines
7