Bo Busy Out Settings; Do Display Parameter Settings; Dc Display Contrast Settings; Nt Network Data Settings - Roland AR-3000SD Command Reference Manual

BO Busy Out Settings
Function: Busy Out setting
Syntax:
stxBO:a,b,c,d;
Syntax:
BO:a,b,c,d
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
b: During Delay Time
0 Off
1 On
c: During Phrase Play
0 Off
1 On
d: During Repeat Interval
0 Off
1 On
DO Display Parameter Settings
Function: Display Parameter setting
Syntax:
stxDO:a,b,c,d;
Syntax:
DO:a,b,c,d
a: Card in slot
0 Card in slot A
1 Card in slot B
2 Card in slot C
3 Card in slot D
b: Display Sleep
0 Off
1 On
c: Sleep Time (0M30S - 59M59S)
DC Display Contrast Settings
Function: Display contrast setting
Syntax:
stxDC:a;
Syntax:
DC:a
a: Display contrast (-10 - +10)
NT Network data settings
Function: Network data settings
Syntax:
stxNT:a,b,c;
Syntax:
NT:a,b,c
a: IP address setting
b: Net mask
c: Gateway
* The above settings values become effective once the power has been turned off, then
on again.
(RS-232C, Command format: Type 2)
(Telnet, Command format: Type 2)
(RS-232C, Command format: Type 2)
(Telnet, Command format: Type 2)
(RS-232C, Command format: Type 2)
(Telnet, Command format: Type 2)
(RS-232C, Command format: Type 2)
(Telnet, Command format: Type 2)
(0.0.0.0--255.255.255.255)
(0.0.0.0--255.255.255.255)
(0.0.0.0--255.255.255.255)
AR-3000SD (Ver.1.00) Command Reference - 53