Unpacking Instructions - Fanimation BRAWN FPD6605 Series Manual

Table of Contents

Advertisement

Available languages

Available languages

This manual is designed to make it as easy as possible for you to assemble,
Tools Needed for Assembly
(Not Included)
• One Phillips head screwdriver
• One ¼˝ blade screwdriver
Before assembling your ceiling fan, refer to section on
proper method of wiring your fan (page 10). If you feel you
do not have enough wiring knowledge or experience, have
your fan installed by a licensed electrician.
For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all steps have been
completed and will be helpful in finding your place should you be interrupted.
Do not install or use fan if any part is damaged or missing. This product is designed to use only those parts supplied with
this product and/or any accessories designated specifically for use with this product by Fanimation. Substitution of parts
or accessories not designated for use with this product by Fanimation could result in personal injury or property damage.
Contact your retail store for missing or damaged parts.
1. Check to see that you have received the following parts:
NOTE: If you are uncertain of part description, refer to exploded view illustration.
Hanger Bracket
Assembly (1)
Ceiling Canopy (1)
Canopy Screw
Cover Assembly (1)
Downrod/Hanger
Ball Assembly (1)
– Downrod (1)
Motor Coupling
– Hanger Ball (1)
Cover Assembly (1)
– Set Screw (1)
– Hairpin Clip (1)
– Clevis Pin (1)
– Pin (1)
Hardware Bags
3/16"-24 Truss Head Screw with
Spring Washer/Flat Washer
install, operate and maintain your ceiling fan
• One stepladder
• One wire stripper
WARNING

Unpacking Instructions

Motor Assembly (1)
Light Housing Assembly (1)
Extension Wire Lead Kit (1)
(for use with optional longer
downrods - sold separately)
Wire Connectors
(4)
(19)
Wiring outlet box and box connectors must be of type
required by local code. The minimum wire would be a 3-
conductor (2-wire with ground) of the following size:
Installed Wire Length
Up to 50 ft.
50-100 ft.
NOTE: Place the parts from the loose parts bags in a small
container to keep them from being lost. If any parts are
missing, contact your local retailer.
WARNING
LED Assembly (1)
Glass (1)
Blade Set (1)
4
Materials
Wire Size A.W.G.
14
12
Hand-held Remote (1)
Receiver (1)
Wall Plate (1)
Wire Connectors
Screws (2)
(5 extra)
Batteries (2)

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Brawn fpd6605blBrawn fpd6605agp

Table of Contents