Elite Screens ezFrame 2 Series User Manual

________________________________________________________________________________________________________________________________
Thank you for choosing an Elite Screens fixed frame projection screen! Please read through this user guide before
utilizing the screen. Correct usage and maintenance will ensure a long product life.
Care & Use Instructions
Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the points
below to prevent that from occurring:
1. Do not touch the projection surface with your hands
2. Do not write or draw on the projection surface
3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen
material.
4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.
5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.
Hardware and Parts List
x 6
a: Frame parts
e: Fix Plates x 50~200
i: Center Support Bar x 1 ~ 2
m: Ø 12*Ø 4*1 Washers x 8
Note: Please make sure all parts are included in your package before proceeding to assemble your fixed frame
projection screen.
Rev. V10312023DT (DS0280 / DZUG0265)
Sable Frame 2 Series
b: Elbow Joints x 4
f: M4*32 Wall Screw x 8
j: Gloves x 2
n: Rubber Hammer x 1
ezFrame 2 &
Fixed Frame Projection Screen
c: Center Joints x 2
g: Ø 13*40 Anchors x 8
k: Protection Sheet x 1
o: Screwdriver x 1
1
User's Guide – V type
d: M5*6 screw x 24
h: Wall Brackets x 4
l: Screen Material x 1
www.elitescreens.com