Table of Contents
Advertisement
Video Intercom Russian Door Station User Manual
3. Select an inactivated device and click Activate.
4. Create a password, and confirm the password.
Note
We highly recommend you to create a strong password of your own choosing
(using a minimum of 8 characters, including at least three kinds of following
categories: upper case letters, lower case letters, numbers, and special characters)
in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the
password monthly or weekly can better protect your product.
5. Click OK to activate the device.
Note
When the device is not activated, the basic operation and remote operation of
●
device cannot be performed.
You can hold the Ctrl or Shift key to select multiple devices in the online
●
devices, and click the Activate button to activate devices in batch.
4.3 Edit Network Parameters
To operate and configure the device via LAN (Local Area Network), you need connect
the device in the same subnet with your PC. You can edit network parameters via
iVMS-4200 client software.
Steps
1. Select an online activated device and click the Modify Netinfo.
2. Edit the device IP address and gateway address to the same subnet with your
computer.
3. Enter the password and click OK to save the network parameters modification.
Note
The default port No. is 8000.
●
The default IP address of the door station is 192.0.0.65.
●
After editing the network parameters of device, you should add the devices to
●
the device list again.
13
Advertisement
Table of Contents
