Edit Network Parameters - HIKVISION DS-KIS603-P User Manual

Note
We highly recommend you to create a strong password of your own choosing (using a minimum
of 8 characters, including at least three kinds of following categories: upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your product.
And we recommend you change your password regularly, especially in the high security system,
changing the password monthly or weekly can better protect your product.
5. Click OK to activate the device.
Note
● When the device is not activated, the basic operation and remote operation of device cannot
be performed.
● You can hold the Ctrl or Shift key to select multiple devices in the online devices, and click the
Activate button to activate devices in batch.

4.3 Edit Network Parameters

To operate and configure the device via LAN (Local Area Network), you need connect the device in
the same subnet with your PC. You can edit network parameters via iVMS-4200 client software.
Steps
1. Select an online activated device and click the Modify Netinfo.
2. Edit the device IP address and gateway address to the same subnet with your computer.
3. Enter the password and click OK to save the network parameters modification.
Note
● The default port No. is 8000.
● The default IP address of the door station is 192.0.0.65.
● After editing the network parameters of device, you should add the devices to the device list
again.
Video Intercom Villa Door Station User Manual
13