Install The Cabinet Hanger Pins To The Back Of The Cabinets - NEC LED-E012i Installation And Maintenance Manual

Holes for power bar
position pin
M6 screws
Power bar
When using the 8 x 8 frame set, use the power bar connecting part to install the power bar.
Power bar connecting screw (M3 (Type A))
(4 red circles)
Power bar connecting screw (M3 (Type B)) Power bar connecting part
(8 blue circles)

6. Install the cabinet hanger pins to the back of the cabinets

The following drawings indicate where Hangar pins are required. Insert the Hangar pins until the pitch of the
screws is no longer visible.
Hanger pin
LED cabinet
Hanger pin
M6
15 mm
English - 17