Install The Power Bar - NEC LED-E012i Installation And Maintenance Manual

5. Install the power bar

Remove the power bar cover and install the power bar using M6 screws.
How to remove the bottom cover
(1) Remove the screws securing the power bar cover.
(2) Raise the front of the power bar cover.
(3) Pull the power bar cover toward you to remove it.
How to attach the power bar position pin
Attach the power bar position pin to the power bar.
4 x 4 frame set: 2 pieces x 2 places
5 x 5 frame set: 2 pieces x 2 places
6 x 6 frame set: 2 pieces x 3 places
8 x 8 frame set: 2 pieces x 2 places x 2 power bar
English - 16