Make The Holes At The Anchor Positions - NEC LED-E012i Installation And Maintenance Manual

Anchor points positions: 8 x 8 frame set
337.5 mm
337.5 mm
337.5 mm
337.5 mm
337.5 mm
337.5 mm
337.5 mm
Anchor points number and positions
Frame set
Anchor points
(horizontal x vertical)
Horizontal distance
Vertical distance
Anchor size

3. Make the holes at the anchor positions

• Make holes at the anchor positions using a suitable tool.
• Use screw anchors/anchor plugs as required.
• Remove the dust or dirt, and wipe off any drilling chips and dust.
1200 mm 1200 mm
4×4
2×4
1200 mm
337.5 mm
Ø10 mm
1200 mm
5×5
2×5
1800 mm
337.5 mm
Ø10 mm
English - 13
6×6
3×5
1200 mm 1200 mm
337.5 mm 337.5 mm
Ø10 mm Ø10 mm
8×8
4×8