Positioning The Fastening Clips; Inserting The Hob Into The Hole In The Work Surface - Smeg SI0644X Manual

8.6 Positioning the fastening clips

Insert the fastening clips in each of the positions
indicated by the arrows. The clips ensure that the
hob will be fixed and centred as accurately as
possible.
To install the clips into the hob, all you have to do is
insert them horizontally into the appropriate space
by applying light pressure.
Then turn them upwards to fix them in place.

8.7 Inserting the hob into the hole in the work surface

Be very careful when inserting the hob. If the process is not followed correctly as described, the hob may
be damaged.
1 Insert the hob, resting the frame completely on
the back edge of the hole in the work surface.
Do not apply pressure to the frame as this part
is very fragile and could be damaged.
2 Then lower the front of the hob until it is fully
inserted.
Instructions for the installer
37