Something Not Working - Smeg SI0644X Manual

7. SOMETHING NOT WORKING?

PROBLEM
The hob does not work.
The results of cooking are
unsatisfactory.
The hob smokes.
The fuses or the magnetothermal
switch of the appliance are
repeatedly triggered.
The saucepans in use are making a
noise.
The cooling fan continues to function
even after the hob has been turned
off.
Sounds can be heard as if something
was creaking or switching on.
There are cracks or fissures in the
hob.
34
Instructions for the user
POSSIBLE CAUSES
- The hob is not wired in or the main
switch is not on.
- There is a power failure.
- The fuse or the magnetothermal
switch of the appliance has blown.
- Unsuitable saucepans have been
used.
- Temperature is too high or too low. -
- The hob is dirty.
- Food has spilled onto it.
- There is no danger to the hob or
the saucepan.
- This is normal
electronics need to cool down.
- This is for technical reasons and
cannot be avoided.
- Switch on the main switch.
- Check power supply.
- Replace the fuse or reactivate the
magnetothermal switch of the
appliance.
- See "Saucepans suitable for use
in induction cooking" section.
Consult cooking guidelines.
- Clean the hob once cooking is
finished. Let it cool first.
- Use a larger saucepan.
- Call Technical Support or an
electrician.
- This is normal with certain types
of pan.
because the
- If cracks or fissures form, or if the
glass ceramic cooking surface
breaks, turn off the appliance
immediately. Disconnect the hob
from the power supply and call
Technical Support.
SOLUTION