Download Print this page

Crosswater BECK BK301SU Manual

Cloakroom basins

Advertisement

Quick Links

BECK
CLOAKROOM BASINS
i
IMPORTANT INFORMATION BEFORE YOU START
Please read carefully and keep this information for further reference.
Thank you for buying a Crosswater Product. To ensure that it
works to its full potential, it needs to be fitted correctly.
Check the contents of the pack carefully before installation.
Crosswater will not be held responsible for any de-fit/re-fit
costs where faulty product has been fitted. If any fault is
found with materials or workmanship, it must be reported
immediately to the manufacturer. Remedial action will be
taken, based on information received, on condition that:
1. Full details are supplied to the manufacturer.
2. The product has not been modified or tampered with;
1
3. The manufacturer is informed of any damage/shortages
prior to installation.
4. The product has not been installed, or attempts have been
made to install.
We do not accept responsibility for any problems that may
occur through incorrect installation. This product should
only be installed by a suitably qualified plumber/installer.
Should the installation be completed by a non-qualified
person any product guarantee maybe considered invalid. For
a claim made under our warranty, written certification of your
installer's qualifications may be required.
V1.03.2023

Advertisement

loading
Need help?

Need help?

Do you have a question about the BECK BK301SU and is the answer not in the manual?

Questions and answers

Summary of Contents for Crosswater BECK BK301SU

  • Page 1 IMPORTANT INFORMATION BEFORE YOU START Please read carefully and keep this information for further reference. Thank you for buying a Crosswater Product. To ensure that it 3. The manufacturer is informed of any damage/shortages works to its full potential, it needs to be fitted correctly.
  • Page 2 IMPORTANT INFORMATION Please read carefully and keep this information for further reference. Please check for any hidden pipes or electrical cables before drilling holes in the floor or walls. When using power tools always follow the manufacturer’s user instructions. This installation guide details fitting to a solid wall. If your bathroom has studded/ plasterboard walls, please use appropriate fixings.
  • Page 3 INSTALLATION Ø6 Use a spirit level to ensure the marks are level and drill a pilot Measure and drill according to the wall fixings being used. hole using a 6mm drill bit suitable for the finished surface Install the basins on the wall with the fixings provided, (i.e..
  • Page 4 Lime-scale marks can be cleaned using a diluted lime-scale remover used in accordance with manufacturers instructions. Lake View House Rennie Drive, Dartford Kent DA1 5aFU United Kingdom Part of the 0345 873 8840 Bathroom Brands Group www.crosswater.co.uk We reserve the right to make technical modifications without prior notice.

This manual is also suitable for:

Beck bk401suBeck bk451su