Smeg SCP496N-8 Manual page 35

Instructions for the user
To display the time remaining until the end of the
cleaning cycle, press the temperature selection
knob.
Two minutes after the cleaning (Pyrolysis) cycle
starts, a door locking device which prevents opening
of the door will be tripped.
indicate that the locking device has been activated.
At the end of the cleaning cycle the door locking
device will remain active until the temperature inside
the oven has reached a safety threshold. When the
oven has cooled down, collect the residues from
automatic cleaning with a damp microfibre cloth.
To select a cleaning cycle with delayed start,
after setting the duration press the temperature
selection knob once.
appear on the display.
Turn the knob right or left to increase or decrease
the time when you want to start the cooking
operation.
A few seconds after the required duration is set,
and will stay lit, and the oven will wait for the
starting time set for the cleaning cycle.
It is not possible to select any functions once the door locking device has been
activated. Wait for
will light up to
and the current time will
to go out.
(Temperature knob)
(Temperature knob)
(Temperature knob)
81