Smeg SCP496N-8 Manual page 18

6.9.2 Programmed cooking
Programmed cooking is the function which allows a cooking operation to be
stopped at an established time depending on the time set by the user, after
which the oven will switch off automatically.
Select a cooking function as described in "6.7
Selecting a cooking function".
Press the temperature selection knob twice. The
display will show the digits
(flashing).
Turn the knob right or left to set the number of
minutes of cooking from 00:01 to 12:59 (keep the
knob turned to increase or decrease more quickly).
A few seconds after selecting the required duration,
will stop flashing and from that point it is
possible to press the temperature selection knob to
set the cooking end time.
For safety reasons, when setting programmed cooking the user must first
program a cooking duration and then set the cooking start time. It is not possible
to set the cooking start time only, without setting the cooking duration.
will appear together with the cooking end time.
To alter the value, turn the knob right or left.
A few seconds after the last knob is pressed,
and
appliance will wait for the cooking start time.
When cooking is complete, the word STOP will
appear, cooking will be interrupted and a buzzer will
sound which can be deactivated by pressing the
temperature selection knob.
64
Instructions for the user
will stop flashing and from that point the
and
(Temperature knob)
(Temperature knob)
(Temperature knob)
(Temperature knob)
(Temperature knob)