Table of Contents
Advertisement
Refer to the following diagram for setting the cleaning cycle duration:
CLEANING
DURATION
During the automatic cleaning cycle, the fans produce a more intense level of
noise due to a greater rotation speed; this is entirely normal and intended to
facilitate heat dissipation.
At the end of pyrolysis, the fans will continue to operate for long enough to avoid
overheating the walls of adjacent units and the front of the oven.
8.6.2 Setting the cleaning cycle
Turn the function selection knob to select one of the
two cleaning cycles out of
To
start
temperature selection knob must be pressed.
will light up to indicate that it is now possible to set
the cycle duration.
Turn the knob right or left to increase or decrease
the duration of the cycle between a minimum of 1h
30m and a maximum of 3h 00m (apart from the
cycle where the duration is set at 1h 30m).
The text "Piro" will appear on the display to indicate
that the oven is performing the cleaning cycle.
80
Instructions for the user
LIGHT DIRT
90 MIN.
the
cleaning
cycle
MEDIUM DIRT
135 MIN.
and
.
(pyrolysis),
the
HEAVY DIRT
180 MIN.
(Function selection knob)
(Temperature knob)
(Temperature knob)
Hide quick links:
Advertisement
Table of Contents
