Operating Modes; First Use - Smeg SCP496N-8 Manual

Instructions for the user
This knob can be used to select a function or to switch off
the oven.
6.5

Operating modes

This appliance is designed to have two operating modes.
6.6

First use

On the first use, or after a power failure,
display. To be able to start any cooking function, the current time must be set.
Turn the temperature selection knob right or left to
reduce or increase the displayed time.
Keep it in the turned position to reduce or increase
more rapidly.
A few seconds after the last adjustment is made, the
time display will steady and the colon separating the
hours from the minutes will flash to indicate the start
of the countdown.
It may be necessary to alter the current time, for example due to daylight saving
time; if so, hold the temperature selection knob turned to the right or left until the
value changes.
It is not possible to change the time if the oven is ON.
FUNCTION SELECTION KNOB
STAND-BY mode: this mode is set when the function
selection knob is positioned on "0". The appliance
displays the current time.
ON mode: this mode is set when the function selection
knob is turned to any function and the selected
temperature appears on the display, or the message
"PYRO" if pyrolysis is taking place.
will be flashing on the oven's
(Temperature knob)
59