Table of Contents
Advertisement
6. PLAY
6.1 Power-on/Auto standby/Auto wakeup
2
P P O O W W E E R R
Switch on
1. Connect the soundbar and subwoofer to power by using the
supplied power cords.
2. To switch on, press
on the soundbar or on the remote
control.
→ The subwoofer is connected to the soundbar automatically.
→ Connected: The connection status indicator turns solid
amber ( ).
NOTES:
−
Use the supplied power cord only.
–
Before switching on the soundbar, make sure that you have
completed all other connections (See
and digital
devices").
Auto standby
If the soundbar is inactive for more than 10 minutes, it will switch
to standby mode automatically. The subwoofer also goes to
standby, and the connection status indicator slowly flashes
amber ( ).
→ Next time you switch on the soundbar, it returns to the last
selected source.
Auto wakeup
In standby mode, the soundbar will wake up automatically when
•
the soundbar is connected to your TV through the HDMI
ARC/eARC connection and your TV is switched on;
•
the soundbar is connected to your TV through an optical
cable and audio signals are detected from the optical cable.
1
3
2
1
"5.1 Connection with your TV
6.2 Play from the TV source
With the soundbar connected, you can enjoy TV audio from the
soundbar speakers.
1. Make sure that your TV is set to support external speakers
and the built-in TV speakers are disabled. Refer to the owner's
manual of your TV for more information.
2. Make sure that the soundbar has been properly connected
to your TV (See
"5.1 Connection with your TV and digital
devices").
3. To select the TV source, press
or TV on the remote control.
→ When playing through an HDMI ARC/eARC cable, the
status indicator turns solid white ( ).
→ When playing through an optical cable, the status
indicator turns solid amber ( ).
6.2.1 TV remote control setup
To use your TV remote control for both your TV and the soundbar,
check that your TV supports HDMI-CEC. If your TV does not
support HDMI-CEC, follow the steps under
control
learning".
HDMI-CEC
If your TV supports HDMI-CEC, enable the functions as instructed
in your TV's user manual. You can control the volume +/-, sound
source, and power on/standby functions on your soundbar
through the TV remote control.
6.2.2 TV remote control learning
Through IR learning, you can program the soundbar to accept IR
commands from your TV remote control, and then use your TV
remote control for simple commands.
1. Press
to switch on.
2. Hold
and + together for more than 10 seconds until the
status indicator flashes amber.
→ The soundbar enters the TV remote control learning
mode.
repeatedly on the soundbar
"6.2.2 TV remote
www.jbl.com
11
11
Advertisement
Table of Contents
