7. SOUND SETTINGS
7.1 Dolby Atmos (Virtual)
With the Virtual Dolby Atmos, enjoy height sound effects when
you play movies in the HDMI IN / HDMI eARC/ARC source.
1. Connect and play your Blu-ray player or streaming device
through the TV ARC/TV eARC connector and the HDMI IN
connector. (See
"5.1 Connection with your TV and digital
devices").
2. Press
on the remote control to switch the Dolby Atmos
sound effect on or off (Default: on).
→ The status indicator turns solid green ( ), if the Dolby
Atmos sound effect is enabled.
NOTE:
−
Switch off the Dolby Atmos effect if you prefer not to have any height
sound effects while viewing or listening.
7.2 Pre-defined EQ settings
With the remote control, select the pre-defined EQ (equalizer)
effects to suit your video or music.
•
: sound mode for movies
→ The status indicator slowly flashes blue twice (
movie mode is enabled on the soundbar.
•
: sound mode for music
→ The status indicator slowly flashes amber twice ( ), if the
music mode is enabled on the soundbar.
•
weather forecasts
→ The status indicator slowly flashes red twice (
7.3 Bass adjustment
You can make bass adjustment as needed.
ATMOS ON
ATMOS OFF
•
On the remote control, press
levels: Level 1, 2, 3, 4, 5 (Default: "Level 3").
x 2
x 2
x 2
, if the
)
: sound mode for TV programs such as news and
voice mode is enabled on the soundbar.
Level 2
, if the
)
x 3
Level 3
x 2
x 4
Level 4
x 1
x 5
Level 1
Level 5
to toggle between bass
www.jbl.com
13
13