Connect; Dolby Atmos; Connect To Hdmi Socket; Connect To Optical Socket - Philips 6000 Series User Manual

3 Connect

This section helps you connect your
soundbar to a TV and other devices, and
then set it up.
Note
•
For identification and supply ratings, see
the type plate at the back or bottom of
the product.
•
Before you make or change any
connections, make sure that all devices
are disconnected from the power outlet.
Dolby Atmos®
Dolby Atmos gives you immersive listening
experience by delivering sound in three
dimensional space, and all the richness,
clarity, and power of Dolby sound.
For more information, please visit
dolby.com/technologies/dolby-atmos

Connect to HDMI socket

HDMI eARC (Enhance Audio Return
Channel)
Your soundbar supports HDMI with eARC/
ARC (Enhance Audio Return Channel). If
your TV is HDMI eARC/ARC compliant,
you can hear the TV audio through your
soundbar by using a single HDMI cable.
HDMI eARC
TV
HDMI eARC
1
On your TV, turn on HDMI-CEC
operations. For details, see the TV
user manual.
• The HDMI ARC connector on the
TV might be labeled differently. For
details, see the TV user manual.
2
Using a High Speed HDMI cable,
connect the HDMI eARC connector
on your soundbar to the HDMI eARC
connector on the TV.
Note
•
Your TV must support the HDMI-CEC and
ARC function. HDMI-CEC and ARC must
be set to On.
•
The setting method of HDMI-CEC and
ARC may differ depending on the TV. For
details about ARC function, please refer
to your TV user manual.
•
Make sure to use the HDMI cables can
support the ARC function.

Connect to Optical socket

1
Using an optical cable, connect
the Optical in connector on your
soundbar to the Optical out
connector on the TV or other device.
Optical in
• The digital optical connector might
be labeled Spdif in or Spdif out.
TV
Optical out
EN 11