Replace the Remote Control Battery
1
Press and slide the back cover to
open the battery compartment of
the remote control.
2
Insert two AAA size batteries
(included). Make sure the (+) and (–)
ends of the batteries match the (+)
and (–) ends indicated in the battery
compartment.
3
Close the battery compartment
cover.
Precautions Concerning Batteries
•
Be sure to insert the batteries with
correct positive " " and negative
" " polarities.
•
Use batteries of the same type.
Never use different types of batteries
together.
•
Either rechargeable or non-
rechargeable batteries can be used.
Refer to the precautions on their
labels.
•
Be aware of your fingernails when
removing the battery cover and the
battery.
•
Do not drop the remote control.
•
Do not allow anything to impact the
remote control.
•
Do not spill water or any liquid on the
remote control.
•
Do not place the remote control on a
wet object.
•
Do not place the remote control
under direct sunlight or near sources
of excessive heat.
•
Remove the battery from the remote
control when not in use for a long
period of time, as corrosion or
battery leakage may occur and result
in physical injury, and/or property
damage, and/or fire.
•
Do not use any batteries other than
those specified.
•
Do not mix new batteries with old
ones.
•
Never recharge a battery unless it is
confirmed to be a rechargeable type.
Placement
Place the subwoofer at least 1 meter (3
feet) away from your soundbar, and 10
centimeters away from the wall.
For best results, place your subwoofer as
shown below.
EN
9