Care For Your Product - Philips 6000 Series User Manual

Hide thumbs Also See for 6000 Series:
Table of Contents

Advertisement

Risk of injury or damage to this
product!
For wall mounting, this product must
be securely attached to the wall in
accordance with the installation
instructions. Use only the supplied
wall mount bracket (if available).
Improper wall mounting may result
in accident, injury or damage. If you
have any query, contact Consumer
Care in your country.
Never place the product or any
objects on power cords or on other
electrical equipment.
If the product is transported in
temperatures below 5°C, unpack
the product and wait until its
temperature matches room
temperature before connecting it to
the power outlet.
Parts of this product can be made of
glass. Handle with care to avoid injury
and damage.
Risk of overheating!
Never install this product in a
confined space. Always leave a
space of at least four inches around
the product for ventilation. Ensure
curtains or other objects never cover
the ventilation slots on the product.
Battery usage CAUTION
CAUTION: Danger of explosion if
batteries are incorrectly replaced.
Replace only with the same or
equivalent type.
Remove batteries if they are
exhausted or if the remote control is
not to be used for a long time.
Batteries contain chemical
substances, they should be recycled
or disposed of as per state and local
guidelines.
Install all batteries correctly, + and - as
marked on the apparatus.
Do not mix old and new batteries.
4
EN
Do not mix alkaline, standard
(Carbon-Zinc) or rechargeable (Ni-Cd,
Ni- MH, etc.) batteries.
The battery (batteries or battery pack)
shall not be exposed to excessive heat
such as sunshine, fire or the like.
Don't disposal of a battery into fire or
a hot oven, or mechanically crushing
or cutting of a Battery.
To avoid battery subjected to
extremely low air pressure.
Note
The rating label is pasted on the bottom
or back of the equipment.

Advertisement

Table of Contents
loading

Table of Contents