Connect; Connect To Hdmi Arc; Connect To Optical; Connect To Audio In - Philips 5000 Series User Manual

3 Connect

This section helps you connect your
soundbar to a TV and other devices, and
then set it up.
Note
•
For identification and supply ratings, see
the type plate at the back or bottom of
the product.
•
Before you make or change any
connections, make sure that all devices
are disconnected from the power outlet.

Connect to HDMI ARC

HDMI ARC (Audio Return Channel)
Your soundbar supports HDMI with ARC
(Audio Return Channel). If your TV is
HDMI ARC compliant, you can hear the TV
audio through your soundbar by using a
single HDMI cable.
1
On your TV, turn on HDMI-CEC
operations. For details, see the TV
user manual.
• The HDMI ARC connector on the
TV might be labeled differently. For
details, see the TV user manual.
2
Using a High Speed HDMI cable,
connect the HDMI ARC connector
on your soundbar to the HDMI ARC
connector on the TV.
HDMI out
(ARC)
TV
HDMI (ARC)
Note
•
Your TV must support the HDMI-CEC and
ARC function. HDMI-CEC and ARC must
be set to On.
•
The setting method of HDMI-CEC and
ARC may differ depending on the TV. For
details about ARC function, please refer
to your TV user manual.
•
Make sure to use the HDMI cables can
support the ARC function.

Connect to Optical

1
Using an optical cable, connect
the Optical in connector on your
soundbar to the Optical out
connector on the TV or other device.
• The digital optical connector might
be labeled Spdif in or Spdif out.

Connect to Audio in

Use 3.5mm audio cable
•
Use a 3.5mm to 3.5mm audio cable
to connect the TV's headphone
socket to the Audio in socket on the
soundbar.
Headphone
(3.5mm)
Optical in
TV
Optical out
Audio in
TV
Audio out
EN 11