Important Safety Instructions; Safety - Philips 6000 Series User Manual

1 Important

safety

instructions
Read and understand all instructions
before you use your product. If damage
is caused by failure to follow instructions,
the warranty does not apply.
Safety
Know these safety symbols
The marking information is located at the
bottom or back of product.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This is CLASS II apparatus with
double insulation, and no
protective earth provided.
AC voltage
The symbol indicates DC voltage.
The symbol indicates polarity of d.c.
power connector.
WARNING!
Warning: Risk of electric shock!
The exclamatory mark is intended
to alert the user to the presence of
important operating instructions.
Use only the power supplies
listed in the user manual.
Risk of electric shock or fire!
•
Before you make or change any
connections, make sure that all
devices are disconnected from the
power outlet.
•
Never expose the product and
accessories to rain or water. Never
place liquid containers, such as vases,
near the product. If liquids are spilt
on or into the product, disconnect it
from the power outlet immediately.
Contact Consumer Care to have the
product checked before use.
•
Never place the product and
accessories near naked flames or
other heat sources, including direct
sunlight.
•
Never insert objects into the
ventilation slots or other openings on
the product.
•
Where the mains plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily operable.
•
Battery (battery pack or batteries
installed) shall not be exposed to
excessive heat such as sunshine, fire
or the like.
•
Disconnect the product from the
power outlet before lightning storms.
•
When you disconnect the power
cord, always pull the plug, never the
cable.
•
Use the product in tropical and/or
moderate climates.
Risk of short circuit or fire!
•
For identification and supply ratings,
see the type plate at the back or
bottom of the product.
•
Before you connect the product to
the power outlet, ensure that the
power voltage matches the value
printed on the back or bottom of the
product. Never connect the product
to the power outlet if the voltage is
different.
EN 3