Wall mount
Note
•
Improper wall mounting may result in
accident, injury or damage. If you have
any query, contact Consumer Care in your
country.
•
Before wall mounting, make sure the wall
can support the weight of your soundbar.
•
Before wall mounting, you need not
remove the rubber feet at the bottom of
the soundbar, otherwise the rubber feet
cannot be fixed back.
•
Depending on the type of wall mounting,
make sure that you use screws of a
suitable length and diameter.
•
Please check whether the USB port on
the back of the soundbar is connected
to a USB device. If it is found that the
connected USB device affects the wall-
mount, you need to use another USB
device of the appropriate size.
Screw length/diameter
Suggested wall mounting height
You are recommended to install the TV
first before wall mounting the soundbar.
With a TV preinstalled, wall mount the
soundbar 50mm/2.0'' in distance from the
bottom of the TV.
WARNING!
•
To prevent injury, this apparatus must
be securely attached to the floor/wall
in accordance with the installation
instructions.
•
Suggested wall mounting height: ≤ 1.5
meters.
1
Drill 4 parallel holes (diameter
3-8mm each according to wall type)
on the wall.
» The distance between the holes
are: 664mm / 26"
10
EN
» You can use the wall mount
template provided for helping
the drilling holes position on the
wall.
2
Tighten the wall mount brackets on
the wall with screws (included) and
screwdriver (not included). Make
sure that they are securely installed.
3
Lift the unit onto the wall mount
brackets and slot into place.
1
~50mm/2.0"
664 mm / 26"
48mm
2
φ4x40
3