Editing Professional Playing Solution; Editing The Time Segment - Unilumin UMini W Product Manual

Auto Run after Power-on: If you enable this function, UniStudio will run automatically the next time when the
PC is started.
Restart Software on Time: If you enable this function, set the restart interval and time, and click OK, UniStudio
will be automatically restarted after the PC time reaches the preset restart time. After the software is restarted, the
window information and playing status before restart will be automatically recovered.
Exit of software on time: If you enable this function and set the exit time, the software will exit automatically
upon the preset time. This function can prevent damages to the uploaded data caused by forcible exit of the software.
Enable Auto Play: If you enable this function and specify a playing solution for the screen, the software will
automatically activate the specified playing solution once the software is started.
Instant plug and play of USB disk: If you enable this function, the PC will automatically read and activate the
playing solution once the USB flash drive is inserted to the PC. If you do disable this function, the PC cannot
implement the plug-and-play function even though you have inserted the USB flash drive to the PC.

4.3 Editing Professional Playing Solution

4.3.1 Editing the Time Segment

Creating a playing solution
1)
On the main window of the software, click Schedule > New, as shown in Fig 4-5:
44
Fig 4-4 Startup Setting