10.3.1
The knobs must be cleaned with a soft cloth dipped in warm water and dried
thoroughly. They can easily be lifted off.
10.3.2
Remove the pan stands and wash them in warm water with a non-abrasive detergent,
taking care to remove all deposits. Replace them on the hob following the instructions
provided in point "9.1Fitting the pan stands".
10.3.3
The burner caps and flame diffuser rings can be removed for easier cleaning; wash
them in hot water and non-abrasive detergent, taking care to remove all deposits, and
wait for them to dry completely.
The burner pins A must be fitted into the recesses B in the flame diffuser ring. The
holes C in the flame diffuser ring must mate with the ignition plugs and thermocouples
D on the hob.
10.3.4
For best performance, the ignition plugs and thermocouples must always be kept
thoroughly clean. Check them frequently and if necessary clean them with a wet cloth.
Remove any dry residues with a wooden toothpick or a needle.
914773752/ D
22
Instructions for the User
The knobs
The pan stands
The flame diffuser rings
The plugs and thermocouples