Table of Contents
Advertisement
At the ends of the legs of the racks there are
silicone rests with a hole that must be centred
onto the matching fixing pins on the hob.
Make sure that the pan stands are simply fitted over their burners, and are not
left in a raised or tilted position; if this occurs, repeat the fitting procedure.
18
Instructions for the User
the fastening pins (1) and (2) and then lower it
until it is resting on the hob.
When properly positioned, the legs of the racks
must not be suspended above the hob but
should rest on top of it.
WRONG
WRONG
To position the rack, you first need to centre
RIGHT
RIGHT
Advertisement
Table of Contents
