Page 1
Monitor 5000 Series 24E1N5600E User manual Customer care and warranty Troubleshooting and FAQs Register your product and get support at www.philips.com/welcome...
Keep the display away from oil. Oil may damage the plastic cover of the display and void the warranty. This electronic user’s guide is intended for anyone who uses the Philips monitor. • Remove any object that could fall Take time to read this user manual into ventilation holes or prevent before you use your monitor.
Page 4
bezel, ensure that the monitor does monitor by placing your hand or not tilt downward by more than -5 fingers on the LCD panel. degrees. If the -5 degree downward • Oil-based cleaning solutions may tilt angle maximum is exceeded, the damage the plastic parts and void monitor damage will not be covered the warranty.
1.2 Notational Descriptions activate a periodic screen refresh application if your monitor will The following subsections describe display unchanging static content. notational conventions used in this Uninterrupted display of still or document. static images over an extended period may cause “burn-in”, also Notes, Cautions and Warnings known as “after-imaging”...
From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily This marking on the product or on entails participation in national take-...
Package contents Monitor 5000 Series 24E1N5600E Quick start Register your product and get support at www.philips.com/welcome 2. Hold the stand with both hands. (1) Gently attach the base to the stand. (2) Use your fingers to tighten the AC/DC Adapter screw located at the bottom of the base.
2.2 Operating the monitor Connecting to your PC Description of the control buttons AC/DC power input Press to switch power on. HDMI input Press more than 3 seconds to switch power off. DisplayPort input USB-C Access the OSD menu. Audio Out Confirm the OSD adjustment.
Page 9
On-Screen Display (OSD) is a feature in SmartResponse Off, Fast , Faster, Fastest On, Off SmartFrame all Philips LCD monitors. It allows an end Size (1, 2, 3, 4, 5, 6, 7) user to adjust screen performance or Brightness (0~100) Contrast(0~100) select functions of the monitors directly H.
Page 10
• MPRT is gaming-optimized mode. Height adjustment Turn on MPRT may cause noticeable screen flickering. It is recommended to turn off when you are not using the gaming function. Resolution notification This monitor is designed for optimal performance at its native resolution, 2560 x 1440.
2.3 Remove the Base Assembly for VESA Mounting Before you start disassembling the monitor base, please follow the instructions below to avoid any possible damage or injury. 0° 90° 1. Place the monitor face down on a -5° smooth surface. Pay attention not to * Display design may differ from those scratch or damage the screen.
Whether you're working SmartImage on screen display. with text applications, displaying images 2. Toggle to the up or down to select or watching a video, Philips SmartImage between the smartImage modes. delivers great optimized monitor 3. The SmartImage on screen display performance.
LED displays can cause eye Why do I need it? damage and affect vision over time. You want the very best visual clarity Developed for wellbeing, Philips and viewing comfort for every type of LowBlue Mode setting uses a smart content. SmartContrast dynamically...
4. Adaptive Sync AMD Radeon R7 260X • AMD Radeon R7 260 • ■ Processor A-Series Desktop and Mobility APUs Adaptive Sync AMD A10-7890K • AMD A10-7870K • PC gaming has long been an imperfect AMD A10-7850K • experience because GPUs and monitors update at different rates.
5. Technical Specifications Picture/Display Monitor Panel Type IPS Technology Backlight W-LED Panel Size 23.8" W (60.5 cm) Aspect Ratio 16:9 Pixel Pitch 0.2058 (H) mm x 0.2058 (V) mm Contrast Ratio(typ.) 1000:1 Optimum Resolution 2560 x 1440 @ 60 Hz Viewing Angle 178°...
Page 16
Height adjustment 130 mm Pivot -90 / +90 degree Power AC Input Voltage AC Input Voltage AC Input Voltage Consumption at 100VAC , at 115VAC , at 230VAC, 50Hz 60Hz 60Hz Normal Operation 22.9 W (typ.) 22.8 W (typ.) 22.8 W (typ.) Sleep (Standby mode) 0.5 W 0.5 W...
Page 17
Specific Substances 100% PVC BFR free housing Cabinet Color Black Finish Texture Note 1. This data is subject to change without notice. Go to www.philips.com/support to download the latest version of leaflet.
For best output performance, please always ensure that your graphic card Recommended Resolution is capable of achieving the maximum 2560 x 1440 @ 60 Hz resolution and refresh rate of this Philips display. H. freq Resolution V. freq (Hz) (kHz) 31.47...
6. Power Management If you have VESA DPM compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically.
Other combinations of Pixel Defect Policy lit and dark sub pixels appear as single pixels of other colors. Philips strives to deliver the highest quality products. We use some of the Types of Pixel Defects industry's most advanced manufacturing...
Page 21
Black Dot Defects the warranty period, a TFT Monitor Black dot defects appear as pixels or sub panel in a Philips flat panel monitor pixels that are always dark or 'off'. That must have pixel or sub pixel defects is, a dark dot is a sub-pixel that stands...
Page 22
BRIGHT DOT DEFECTS ACCEPTABLE LEVEL 1 lit subpixel 2 adjacent lit subpixels 3 adjacent lit subpixels (one white pixel) Distance between two bright dot defects* >15mm Total bright dot defects of all types BLACK DOT DEFECTS ACCEPTABLE LEVEL 1 dark subpixel 5 or fewer 2 adjacent dark subpixels 2 or fewer...
Please contact our Philips Customer Service Representative or local contact center (by Consumer care number) for more details. Philips Customer Care Center number listed below.
Uninterrupted display of still or Service contact information listed static images over an extended in Important information manual period may cause "burn-in", also and contact Philips customer service known as "after-imaging" or "ghost representative. imaging", on your screen. "Burn-in", * Functionality different according to "after-imaging", or "ghost imaging"...
Page 26
Shut down your computer, monitor, make sure that there is disconnect your old monitor and no pressure or force applied to reconnect your Philips LCD monitor. the panel surface side. This may • Turn on your monitor and then turn affect your warranty conditions.
Page 27
PC, workstation or Mac? repaired. The damage mentioned above is not covered under your warranty. Ans.: Yes. All Philips LCD monitors are fully compatible with standard Q12: Why is my Display not showing PCs, Macs and workstations.
Page 28
Ans.: Important information manual can be download on the Philips website support page.
Page 29
This product has been manufactured by and is sold under the responsibility of Top Victory Investments Ltd., and Top Victory Investments Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.