Mounting The Hood Body; Ducted Version Air Exhaust System; Recirculation Version Air Outlet - Smeg KSEV96X Instruction Manual

Hide thumbs Also See for KSEV96X:

Table of Contents

• Before attaching the hood body, tighten the two

screws Vr located on the hood body mounting

points.

• Hook the hood body onto the screws 12a

• Fully tighten support screws 12a

• Adjust screws Vr to level the hood body.

In order to install the ducted version, connect the hood to the chimney using either a flexible or rigid

pipe ø 150 mm, the choice of which is left to the installer.

• Push fit Damper 10 onto the air outlet.

• Fix the pipe in position using sufficient pipe

clamps (not supplied).

• Remove any activated charcoal filters.

• Push fit connection 15 onto the air outlet.

• Insert the connection extension pieces laterally

14.1 in connection 15.

• Make sure that the outlet of the extension pieces

14.1 is horizontally and vertically aligned with

the chimney outlets. If this is not the case, adjust

the position by either reversing the connection

extension pieces 14.1 or by pushing connector

15 all the way in.

• Ensure that the activated charcoal filters have

been inserted.

Mounting the hood body

Connections

Table of Contents