Menu Settings; Menu Navigation; User Menu (In Segments) - OHAUS Dafender 3000 i-DT33P Instruction Manual

EN-26

4. MENU SETTINGS

The User Menu allows the customizing of scale settings.
Note: Sub-menu for options (USB, Ethernet and Print2 in the table below) will be active only when the specific
board is installed. See their separate option instruction manuals for additional setting information.
4.1

Menu Navigation

4.1.1

User Menu (in segments)

C.A.L S.E.t.U.P r.E.A.d
ZErO reset reset
SpaN C.UNIt Stable
LINE rANGE ZErO
GEO CAP1 FIltEr
C.test Grad1 AZt
End CAP2 B.LIGHt
Grad2 b.COLOr
P.ZerO SCreeN
A.Off
P.UNIt
P.SAuEr
A.tare
End CEC
End
Notes:
Some modes/units may not be available in all models.
When LEGAL FOR TRADE is turned ON (the security switch S1 is in the locked position), the menu settings
will be affected as below:

Calibration function is disabled.

Zero Range setting is locked at 2%.

Stable Range setting is locked at 1d.

Auto-Zero Tracking setting is locked at 0.5d.

Filter and Units are locked at their current settings.

Stable Only is locked at On.

:
Lb oz unit is locked at Off.

Power saving mode is disabled.
Note: Please refer to Legal for Trade chapter for the position of the security switch S1.
mM.O.d.E U.n.I.t R.s.2.3.2 P.r.I.N.t
reset reset reset
wWeIGH BAUd
kg
COUNt PArItY
g
CHECK StOP
lb
tOtAL H.SHAKE
oz
tABLE ALt.P
lb:oz
End ALt.t
t
ALt.Z
End
End
U.S.B E.t.H.N.E.t P.r.I.N.t2 L.o.c.k E.n.d
reset reset reset
ASSIGN BAUd IP.Addr
Stable PArItY u.E.r.
mMODE StOP ENd
tImME H.SHAKE
lINkto ALt.P
C.SUmM ALt.t
tEmMp ALt.Z
End ENd
Defender 3000 Indicators
reset reset
ASSIGN L.ALL
Stable L.OFF
mMODE L.ZErO
tImME L.PrINt
lINkto L.UNIt
C.SUmM L.mModE
tEmMp L.mMeNU
ENd L.tArE
End