Tank-Mounting Requirements - H3C S6850-56HF-IM Manual

The tank-mounting method varies by tank width. When you mount the switch in a tank with a width of
23 inches, remove the slide rails and use mounting brackets and tank-mount adapters to mount the
switch.
Figure2-2 Mounting the switch in a tank with a width of 23 inches
Remove the slide rails
When you mount the switch in a tank with a width of 21 inches, remove the tank-mount adapters and
use only mounting brackets to mount the switch.
Figure2-3 Mounting the switch in a tank with a width of 21 inches
Remove the tank-
mount adapters and
mounting brackets

Tank-mounting requirements

Figure2-4 S6850-56HF-IM chassis dimensions
(1) Slide rail
Table2-1 shows the required installation accessories when you install the switch in a tank with
different widths.
Table2-1 Required installation accessories when you install the switch in a tank with
different widths
Switch model
S6850-56HF-IM
For more information about tanks, see H3C Immersion Cooling System User Guide.
Attach a hook to
each mounting
bracket
Attach mounting Attach a hook to
brackets to the each mounting
chassis bracket
Required installation accessories
Mounting brackets
Mounting brackets and tank-mount
adapters
Hang the switch
over the tank
Hang the switch
over the tank
(2) Tank-mount adapter
Tank width
21 inches
23 inches
2-3
captive screws
Gently mount the
on the mounting
switch in the tank
brackets to
secure the switch
Gently mount the
switch in the tank
secure the switch
Fasten the
Fasten the
captive screws
on the mounting
brackets to