Removing A Power Module - H3C S6850-56HF-IM Manual

Figure2-17 Installing a power module

Removing a power module

CAUTION:
When the switch has power modules in 1+1 redundancy mode, removing one power module does
not affect the operation of the switch. When the switch has only one power module installed,
removing the power module powers off the switch.
To remove a power module:
1. Remove the power cord from the power module.
2. Hold the handle on the power module with one hand, pivot the latch on the power module with
your thumb, and pull the power module part way out of the slot. Supporting the power module
bottom with the other hand, slowly pull the power module out of the slot.
2-11