Send Settings - Fax; Receive Settings - Fax - Epson WorkForce Pro WF-5620 User Manual

Send Settings - Fax

Set the send options you want to use for outgoing faxes.
Setting
Batch Send
Save Failure Data
Parent topic: Selecting Advanced Fax Settings

Receive Settings - Fax

Set the receive options you want to use for incoming faxes.
Setting
Receive Mode
Distinctive Ring
Rings to Answer
Options Description
Off Sorts outgoing faxes by recipient in the product's
memory, and then sends them as a batch.
On
Off Saves faxes that failed to be sent in the product's
memory. You can resend the faxes from the product's
On
Status Menu.
Options Description
Manual Lets you confirm whether an incoming fax should be
printed; a telephone must be connected to the product
Auto Automatically receives and prints faxes.
All If you are using a Distinctive Ring Service on your
phone line, your telephone company can assign two
Single
or more phone numbers to the same line and assign
Double different ring patterns to each. If you use this service,
select the number of rings for your fax number so your
Triple
product can receive faxes on the correct number of
Double&Triple rings. Select All for phones lines that do not use this
service.
1 to 9 Sets the number of rings before your product receives
a fax. If Receive Mode is set to Auto and an
answering machine is connected to the product, make
sure this setting is set higher than the number of rings
your answering machine is set to answer a call.
174