Table of Contents
Advertisement
2.
Determine the installation position of the chassis rails based on the position of mounting
brackets and the distance between the front and rear rack posts.
Table2-4 Chassis rail installation position
Mounting bracket
Switch model
position
Port-side installation
position for mounting
brackets, as shown in
Figure2-8.
HPE NW CW
5960
24x100G/200G
+8x400GQDD
Sw
Power supply-side
installation position for
mounting brackets, as
shown in Figure2-9.
3.
Place the chassis rail against the chassis side panel. Align the chassis rail installation holes with
the screw holes. Use the provided M4 screws to attach the chassis rail to the chassis. See
Figure2-8
and Figure2-9.
Figure2-8 Attaching the mounting brackets and chassis rails to the switch (port-side
mounting position for the mounting brackets)
Distance between
the front and rear
rack posts
650 to 828 mm (25.59 to
32.60 in)
585 to 763 mm (23.03 to
30.04 in)
520 to 698 mm (20.47 to
27.48 in)
580 to 758 mm (22.83 to
29.84 in)
515 to 693 mm (20.28 to
27.28 in)
472 to 628 mm (18.58 to
24.72 in)
9
Chassis rail
installation position
Position a
Position b
Position c
Position d
Position e
Position f
Advertisement
Table of Contents
Need help?
Do you have a question about the Networking Comware 5960 Switch Series and is the answer not in the manual?