6-1. Mechanical Adjustment
6-1-1. Reel Table Height Adjustment
Note
The reel table height becomes the reference of the tape path system.
Be sure to adjust the reel table height after replacing the reel table.
Preparations
1. Check that the unit is in the unthreading end state.
2. Turn off the power.
3. Remove the outside lid assembly and the outside panel assembly.
(Refer to Section 1-6.)
Tools
. Reel table height gauge (SR):
. Cassette reference plate:
SRW-1
Section 6
Mechanical Alignment
J-6531-620-A
J-7032-610-C
6-1 (E)