5-5-2.
Notes
1. Cleaning blade
Never touch the cleaning blade that is attached to
the entrance head assembly with bare fingers as
the sharp edges of the cleaning blade may cut
your fingers. When replacing or adjusting the
parts around the cleaning blade, be careful not to
cut your fingers.
2. Tools
. Before using tools, be sure to clean the surfac-
es.
. Cleaning cloth :
3-184-527-01
. Cleaning fluid :
9-919-573-01
. Be sure not to scratch tools during use.
Adjustments cannot be carried out correctly
with the tools scratched.
SRW-1
[Entrance side]
Cleaning blade
5-65 (E)