Table of Contents
Advertisement
Problem solving guide
Problem
HydroCleaner (cleaning
agent) has been put in
the water container.
162
Cause and remedy
The instructions on the display were not followed.
To achieve an optimum cleaning result, the individual
steps of the cleaning process are coordinated with
each other. Always follow the instructions in the dis-
play (see "Cleaning and care – Care").
If the cleaning process with
started:
Switch the combination steam oven off to cancel
the cleaning process.
Empty the water container and rinse it thoroughly.
Restart
HydroClean
If the cleaning process has already been performed
with
:
HydroClean
In the wash phase, the entire system is rinsed several
times with fresh water. After the cleaning process is
complete, all cleaning agent residue is removed.
Start
HydroClean
HydroClean
.
again if necessary.
has not yet
Advertisement
Table of Contents
